How to connect 3 monitors to an HP Laptop Docking Station
Multiple external monitors or accessories can be connected to the laptop docking station simultaneously. The docking station is more cost-effective than other methods of connecting laptops and desktops. It also requires fewer ports, and indirectly adds additional ports.
Is it possible to connect 3 monitors to an HP laptop docking station?
You can connect it using DVI, HDMI, and VGA units. These units can be combined with the outputs from the display ports to create a total of three monitors. The customization of the display port outputs and graphics card configuration will vary. The fastest solution is HP USB-C Dock G5.
Importance of connecting 3 monitors to an HP laptop docking station
This technique was implemented because the video card’s ability to optimize the display settings of the docking laptop makes it possible for the monitor to be properly configured. This allows you to use multiple monitors for multitasking.
This will allow for more screen space to view the material clearly and on a large scale. This method is being used by many people to create large displays to display their material. Further, the explicit preview is possible with quality input and output mechanisms.
Furthermore, you have to go by the following steps while connecting the 3 monitors to the HP laptop using the docking station.
Before you start with the setup, make sure that your laptop supports multi-mode displays. The video card’s capabilities should not be limited to one monitor. You can expect an active, accurate setup overall.
Recommended steps for how to connect 3 monitors to an HP laptop docking station
Step 1.Analyzing the ports available
You must first observe the ports used to build the connections. Modern computers have multiple interfaces for video. A Docking Port function should also be available.
If the HP laptop has two ports, the card can send and receive the signal simultaneously. However, if your laptop has only one port on the video card, it will not be able to perform this task.
You may find options for extending the functionality through the Docking system.
If you want to go ahead with the connection through the docking station, you have to look for the multimedia mode compatibility that will aid in connecting three different monitors.
Step 2. Modifying the settings of your card
Once you see that there are three different ports but no availability of options for connecting the port simultaneously at the same time, you have to check the compatibility of the video card for displaying the multiple monitors.
This is the simplest method. Simply plug in your monitor. Next, click on the start menu >>>type LCD to change the display settings.
The display settings will now check for multiple displays, some of which are disabled and others that are enabled as the primary. There will also be secondary displays that can be extended or used as additional displays.
Click on the option advanced display settings>>> check the number of monitors connected and then proceed to the next step.
Step 3. The graphic card settings are checked
For this, you have to go through the display manager>>> open it>>> expand the display manager>>>note down the model number and manufacturer for your graphic card>>>search the multi-display or multi-monitor graphic card.
Another alternative method is available. You can use the Daisy Chain setup or the display link setup.
Step 4. Connect the monitors to a docking station for your laptop
You will need the additional equipment to connect the three monitors. The USB display adapter.
The display adapter must be connected to the USB port on the HP laptop docking. It must be either DVI or VGA. No matter what the case, your requirements will dictate the port type.
Summing it up
The steps above will connect your three monitors to the HP docking station. Follow these steps to get started with multitasking.