How do I connect Canon m50 with Computer (using Wifi or USB)?
Canon Inc. has produced the Canon m50 single-lens, autofocus reflex, and mirror-less camera.
This camera is one of the most advanced Cameras. It also transfers photos from the Camera to the Computer automatically. To get the process to work, you must first set up a connection between the Camera and Windows or Mac OS.
A wired connection between Canon M50 & your computer is simpler and more reliable, but it may take too much time to transfer high-resolution photos and videos. You can use a high-speed USB cable to do the job (Hey! You can find it on Amazon.
How to Connect Canon M50 to Computer via WIFI
Connecting Canon M50 to Computer
Step 1. Connect to the WiFi Network
First, connect your Canon M50 to the same Wi-Fi network. Next, turn on the Wi-Fi button on Camera to set up your connection.
You will need to hold down the Wi-Fi button on Camera in order to activate the button. Next, press and hold the button to search for the name you have given your Wi-Fi network.
It will connect to the network after you have done all of the above. Once it is connected to the network, you will need to turn on Auto Send Images To Computer mode. You can install Utility 2 Software on your Windows or Mac computer to make it easy to connect.
Step 2. Pair computer and Canon m50 camera before starting to transfer your photos
Both the Canon M50 camera and the computer must be paired in order to transfer photos. After you have set up your wifi connection, make sure to pair them. To pair, activate Canon Image Transfer Utility and enable Wi-Fi.
If your camera and computer are connected to the same network, the camera will display a pop-up asking you to enter your IP address. Select the Auto option, then click OK. This will assign the exact same IP address to both your Canon m50 camera as well as your computer. After this is completed, the pairing process will be successful.
Step 3. Assign Destination Folder on Your Computer
After the pairing between the Camera and the computer is complete, assign a folder. After the Camera is connected to the computer, the camera will ask permission to transfer the photos.
Before you click “OK”, you must create and assign a folder for Camera. This will allow the Camera to automatically transfer photos to the folder whenever it connects to the computer. It is important to assign the destination folder so that the image can be stored on the computer.
How do I verify that my Canon m50 is connected properly to my computer?
After the connection has been established and photo transfer from Canon m50 into computer begins, you’ll see the following indicators
Canon m50 will blink rapidly