Dbpower Projector T20


How to use DBPower Projector

The DBPower mini projector has a large screen size of up to 176 inches. This projector produces sharp images, compared to other mini projectors.

How to use the DBPower projector

Guidelines for how to use the DBPower projector

  • Connecting the projector with a power source

Connect the DBPower RD810 projector first to the power cable. After this, the projector will show an indicator light that confirms the connection to the power source.

The “Power” button on the DBPower Projector is pressed. It will appear on the projector screen or the remote control. When you turn on your projector, you’ll be presented with a welcome message.

  • Multimedia screen booting

The multimedia screen will appear after 3-5 seconds. This indicates that the device has successfully booted. If you are unable to get the desired result, make sure that the cables and plugs are properly connected.

  • Corrections to focus & keystone

The image displayed on the projector will now be in a trapezoid form. You can adjust it using the keystone correction function to see if the system has done the right thing.

You can normalize your display image by pressing the numeric keys 3. If you’re still having trouble obtaining the desired image size or shape, please refer to the main menu image settings.

  • Image focus

Keep the projector horizontally oriented. Enter the menu settings on the projector screen. Now adjust the focus using the numeric key “2”. You can now check the adjustment by showing the video or the menu.

  • Display settings

An optical keystone correction function is used by the projector. The menus can be controlled using a DBPower remote. It allows you to adjust the image according to your requirements and needs. It is important to remember that the projector doesn’t have a horizontal keystone function.

It might be helpful to position the DBPower projector horizontally next to the projection screen. This will allow you to accurately project the presentation or video on the projector. If you have issues with your display, the projector may be placed horizontally next to the projection screen.

Adjust the position of the projector so that it is horizontal to the screen.

  • You can play media from a USB/SD memory card

Place the USB/SD card in the slot or port on the projector. After confirming the connection settings in the Main menu, choose the SD or USB option.

  • Supported multimedia formats

Choose the content you wish to display. The options available are Video/music/photos/text. Select the file you wish to display. After the end of initiation of the same presentation, or video, press “display” or “stop.”

Speaking of the Audio file, you can choose from MP3/WMA/OGG/AAC/MA4/FLAC/APE/WAV files. You can also choose between JPEG/BMP/PNG if you wish to display an image file.

  • An AV connection

A 3-in-1 AV Cable is the best choice for a good AV connection. The 3-in-1 AV cable can be used to connect the cables to the projector. After connecting, select the AV signal source.

  • HDMI connection

In case the DBPower projector is not working, you need to choose the correct HDMI slot. Connect the computers and compatible devices to the HDMI port. After you have made the connection, choose the HDMI signal source.

  • 3.5mm audio connection

You can connect headphones or speakers to your projector using the 3.5mm audio connector. Dolby’s sound is not supported by the projector.

How to use DB power projectors.

If you do not have the necessary knowledge or update on how to use the DBPower projector refer to the steps and guidelines above.

You can ask for further assistance by leaving your doubts and questions in the comments section. We will do our best to provide you with the best solution.

A user manual is included with the device. It covers all aspects of its operation and provides detailed instructions for troubleshooting.

Leave a Reply

Your email address will not be published. Required fields are marked *