How To Use Projector With iPhone?

Author:

How to Use LED Projector Mini with iPhone

You may want to project your iPhone content onto a large screen. It is important to have a solid understanding of how to use an iPhone LED projector mini.

It is very simple. All you have to do to make the connection is to look for the right connectors and accessories.

You will need the adapters and connectors that you require

You need the best adaptor to mirror the content of the iPhone, iPad, or iPod touch on the secondary screen.

The lightning connector iOS devices require the use of the lightning digital adaptor to connect to the VGA adaptor.

The 30-pin dock connectors are required for iOS devices.

The building of a connection

After you have purchased the connectors you can connect the LED mini projector with the iPhone, iPad, or iPod touch. To do this, plug your VGA adaptor or digital AV into the charging port. It is located at the bottom of the iOS device.

It is crucial to connect the HDMI cable or VGA cable with the adaptor. Connect the HDMI or VGA cable at the other end to the secondary display. The secondary display is an LED mini projector.

Turn on the LED mini projector and you are ready to continue with the process. If necessary, switch to the appropriate video port on your LED mini projector. If you are unable to find the appropriate options, please refer to the manual for the LED mini projector. Once you’ve done that, your iPhone, iPad, or iPod Touch screen will turn into a projector screen.

After connecting to the display, charge your iOS device

As you can see, most adaptors include an additional 30-pin lightning connector dock connector. It can be used to charge the iOS devices that are connected to the LED mini-projector. To do this, connect the lightning connector or the USB dock to the adaptor.

Simply plug the USB connector into your power source.

Additional help

If you notice that the video is not playing but the audio is missing, make sure you use the digital AV adaptor included with the HDMI port.

You will notice that the VGA adaptor doesn’t have audio signals. You will need to connect the headset Jack in this instance.

If the application does not display video or play audio, then it is likely that the adaptor is not compatible with the application. You can check compatibility in this case on the Applications Info page.

If you notice that the Alert states that HDCP-compatible devices are a requirement, this means that the adaptor is not compatible with the connector.

You will get an alert for the HDCP compatible device if you try to stream movies and other streaming videos with a non-HDCP digital internet connection.

Other issues

You may not be able to establish the connection even after following all the steps.

  • The adaptor should be disconnected from the projector and reconnected from the iPhone, iPad, or iPod Touch. The cable could be the cause of the problem.
  • Sometimes you may need to remove the VGA and HDMI extension cables. Some accessories convert the VGA HDMI signal into different video formats.
  • Make sure you always have the most recent iOS version. If you are unsure about any of these options, contact support for your iPhone, iPad, or iPod Touch.

The bottom-line on how to use an LED projector mini for iPhone

You can establish the connection between your iPhone and the LED mini-projector by following the steps. We welcome your comments or feedback. We will do our best to address your suggestions in the next blogs.

Leave a Reply

Your email address will not be published.