Screen Mirroring iPhone to Chromebook

Author:

How to screen mirror iPhone to the projector

Screen mirroring iPhone to the projector can be done for many reasons. You might want to view a movie, show, or go through an official presentation.

You can connect your iPhone to a projector via Wi-Fi or an adaptor cable. Let’s now see how to mirror the screen from iPhone to projector.

An adaptor cable connects iPhone to Projector

This is the simplest and most convenient method to connect your iPhone to Projector. An adaptor cable is all you need to connect the two devices.

Many projectors include a video cable to allow them to connect to random peripherals and devices, such as smartphones, laptops, and other mobile devices.

An iPhone does not come with a video port. To connect the iPhone to the projector, you might need one of the adaptors listed below.

Lightning-to-VGA adaptor: This allows you to connect your iPhone’s lightning port with a standard VGA cable that is plugged into the projector.

Lightning Digital AV adaptor. This adaptor allows you to connect your iPhone to the HDMI cable. You can find it on Amazon.

Before you begin the connection process, make sure that your projector and iPhone are compatible with both the cables. This is the easiest way to connect if you’re new to the process. The VGA port can be found on the projector by using a thick 30 pin cable with screws on each end.

HDMI cable is a thin, plugged cable that is used for HDTVs. If you are unsure about how the cable works, ask a technician for help or refer to the manual that came with your projector.

Once you have found the cables, follow these steps to screen mirror the iPhone to the projector.

Screen mirroring iPhone to the projector: Here are some steps

Step 1. Connect the cables to your ports

Plug the HDMI or VGA cable ends to the port on the projector. This must be the exact projector that you use for screen mirroring with your iPhone.

Step 2. Establish the connection

Connect the adaptor to the other end of your VGA/HMDI cable once you have completed this step. If you are using a VGA cable, the Apple Digital VGA adaptor and Apple Digital AV adaptor will give you the best results.

After that, connect the 30 pin connector to the adaptor at the lower end. Now both devices can be connected.

Step 3. Switch on the Projector

Turn on the projector, and adjust the settings to receive input from the adaptor. The settings for VGA cable or HDMI cables will differ.

The input source is set to iPhone. Now the projector can receive video input from the iPhone.

Step 4. Start screen mirroring

Turn on your iPhone and tap the screen mirroring button at the Control Center. Now you can see the screen mirroring to the projector. It is easy to start the presentation or stream video according to your requirements.

The procedure is the same regardless of whether you’re using an iPhone or another Apple device. You will still need to use the appropriate cables depending on the available ports and input/output abilities.

Screen mirroring iPhone to the projector: The bottom line

Before you can begin the screen mirroring iPhone projector process, it is important to have all the necessary accessories on hand. Apple devices are not compatible with standard accessories. This is why you need a high-quality adaptor for either the Apple VGA or Digital VGA.

The rest of the process is easy if you check the port availability on your projector. You can also find more great tips and suggestions in this section about your gadgets and smart devices.

Leave a Reply

Your email address will not be published.